Dynostand

What is Dynamometer?

A dynamometer (popularly called "dyno") is a machine that measures engine power, torque and fuel mixture. In the Dynamo, it is possible to test the engine at different loads and conditions, which helps us to adjust the motorcycle to the ideal setting.

Why Should I Measure My Motorcycle with the Dynamometer?

Once you have made modifications to your motorcycle, you should have them configured to get the best performance without sacrificing driving pleasure and fuel economy. Changing the exhaust on some motorcycles will result in loss of power as it is not set to the new exhaust parameters. The same goes for an air filter. On street-bikes with greater mileage, you can get an overview of the engine's technical condition, whether it has lost power or has gaps in the power graph.

How does it improve the performance of my motorcycle?

A configured motorcycle has the maximum potential available from this engine. Dyno can improve engine dynamics and fuel consumption to streamline engine performance. Note that the word "performance" is not only about the maximum power but also about good driving, a smooth running engine and good fuel economy.

How does it prevent costly improvements in the future?

An incorrectly adjusted fuel mixture engine can cause damage. Too poor fuel mixture starts to overload the engine and overloads the valves as the temperature rises.

Properly tuned engine does not have to do as much work as a poorly tuned engine(for example, normal driving, cruising on the road). Properly set engine results in less wear.

How do I know my motorcycle needs a dyno?

You don´t, people often don't know to want better performance from their motorcycle, but if you feel the engine is running unevenly or there are gaps in performance, the cycle needs adjusting or checking. If the engine temperature is too high or too low, this may indicate a problem with the fuel mixture.

Most of the engines that have been modified in the intake, exhaust, use racing fuel, or have undergone various engine modifications must be set up in the dyno for the appropriate changes.

Which motorcycles can be measured in a dyno?

All motorcycles can be measured in the dyno, including ATVs, quads, choppers and racing equipment.

Are there any requirements for me to measure my motorcycle in a dyno?

Your motorcycle must be in good technical condition. You are responsible for the maintenance of your technique and in case of doubt, you can order a technical inspection because we will still take the maximum out of your motorcycle.

Things to watch out for:

  • Chain tightened
  • Gear wheel and chain running in good condition
  • The rear tire has not reached the wear limit
  • Air filter cleaned or new
  • Fresh fuel in the tank, at least half a tank
  • No leaks

 

Dünostend

Võimsuse mõõtmine-5 strokes 100eur
Power commander setup III generation from 350eur
Power commander setup V generation from 350eur
Reconfiguration from 275eur
Powervisioni 1x License Fee 250eur
Woolich 1x License Fee 250eur
Custom motorcycle setup Price is negotiable
Carburetor motorcycle setup Price is negotiable
Dynostand additional hourly fee 75eur/h

 

 

Please contact us by e-mail at info@mrttech.ee or +372 5256002 to make an appointment.