Öhlins AM RXF36 m.2 Coil TTX18 29 /51/120-170
zoom_out_map
chevron_left chevron_right

Öhlins AM RXF36 m.2 Coil TTX18 29 /51/120-170

Laoseis puudub, küsi saadavuse kohta
1 212,30 €
Tee pakkumine

Sinu pakkumine on saadetud

Sinu Pakkumine on kinnitatud, palun kontrolli oma postkasti

  •     *Kohustuslikud väljad

Laeb


The race proven TTX18 dampening from the DH38 Race Fork has been reworked for the all new RXF36 M.2 fork to give optimal traction and control on trails and Enduro race courses. The Öhlins RXF36 M.2 is available as an Air or Coil fork. The TTX18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved.

The damping adjustment range is set specifically for trail to Enduro race use with 15 clicks of low speed compression and low speed rebound. For the high speed compression damping you get 3 clicks plus a climb mode setting. The retuned twin piston three chamber air spring system allows total air spring tuning from the initial movement through to the bottom out.

Technical Specifications:

Coil spring 9,7 N/mm (additional spring rates available) Weight approx. 2380 g (with full steerer and heaviest rate spring) Stroke 120 - 170 mm (170 mm standard stroke, please see note below) Stanchion tubes 36 mm Axle 15 x 110 mm Offset 51 mm Wheel size 29 Maximum tire sizes 29 x 2,8 / 27,5 x 2,8 / 27,5+ x 3,2 Aluminium design, hard anodized Fully servicable and rebuildable 2 years limited warranty

Please note, that the RXF36 M.2 Coil forks are supplied with 170 mm travel as a standard. Please inform us about the stroke you want so we can change if needed. This change is free of charge.

Adjustment:

Spring preload 15-click rebound damping 15-click low speed compression damping 3-click high speed compression damping Climb mode Optional springs available (see below)

Purchased parts package:

1 MTB front fork RXF 36 M.2 Coil 1 axle 15 x 110 mm 1 star-nut Owners manual

The RXF 36 Coil forks are equipped with 9,7 N/mm (55 lbs/in) spring as a standard. Optional springs are available between 6,1 and 11,5 N/mm (35-65 lbs/in). Spring series 18651-xx.

If you order an alternative front fork spring we offer to install it free of charge before shipping and supply the standard spring unmounted. Please inform us via note in the order form if you would like us to install the alternative spring.

Technical data:

Wheel Size: 29
FGMTB 3617 2020
Lisainfo
Tarne
Laoseis puudub, küsi saadavuse kohta

Teil on võimalik MRT TECH OÜ e-poest toodete tellimisel valida erinevate kohaletoimetamise viisi vahel. Hinnad sisaldavad käibemaksu.

• SmartPOST pakiautomaadi teenus Eesti piires- hind vastavalt SmartPosti hinnakirjadele.

SmartPost-ga peab Teie tellimus üldjuhul jõudma kohale 1 - 3 tööpäeva jooksul alates ostusumma tasumisest. Juhul, kui mõnel põhjusel tekib tellimuse täitmisel viivitus, võtame teiega koheselt ühendust.

Tellimuse jõudmisel valitud pakiautomaati saadetakse Teile paki saabumise kohta SMS sõnum. Sõnum sisaldab pakiautomaadi asukohta ja personaalset uksekoodi, mille alusel Te oma paki kätte saate. Saadetisi hoiustatakse tasuta SmartPOSTi pakiautomaadis 7 kalendripäeva alates sõnumi saabumisest Teie mobiiltelefoni. Väljastamata pakkide kohta saadetakse teile täiendavalt 2 meeldetuletussõnumit.

• Tulen ise järele - 0 €

Oma tellimusele on võimalik ka ise järele tulla aadressil Tondi 92, Tallinn. Soovitav enne tulekut ette helistada ning kokku leppida

• DPD kullerteenus - Eesti, Baltikum, Euroopa