English
Uus
Swingarm Cover with Chain Guard MTS/PP/RS - matte
The Carbon Swing Arm Guard for the Ducati Multistrada V4 Pike's Peak covers the swing arm below and complements the rear fender to create a cohesive overall look at the lower rear!
_x000D_
_x000D_
_x000D_ The final clear coat comes in a silk matte finish and matches the clear coat used for Ducati Performance parts.
_x000D_ For our carbon fiber, we exclusively use Prepreg material that is specifically manufactured for this purpose and similar to what is used in Formula 1 and space travel. The material is laboriously hand-laminated and cured in several stages in an autoclave, resulting not only in a unique appearance but also exceptional technical properties. With the same volume, it has three times the specific stiffness of steel and weighs only a fraction of its weight due to its low density. These properties are particularly pronounced in our material due to the high fiber volume content.
_x000D_ To optimally protect this high-quality material from environmental influences, we use a specially developed plastic coating on all surfaces, which in combination with our clear coat creates an unprecedented and unique depth effect that particularly highlights the high-quality material.
To make installing this part as enjoyable as riding it, we use only the original mounting points.
_x000D_
_x000D_
The Facts:
_x000D_
_x000D_
- With ABE
_x000D_ - No additional registration required
_x000D_ - Sealing of all surfaces (inside and outside) with a unique plastic coating to protect against environmental influences of all kinds and provide an optimal base for the additional clear coat
_x000D_ - Additional clear coating on all visible surfaces for a uniquely smooth surface
_x000D_ - Multilayer UV protection layer to prevent aging processes in the material
_x000D_ - Delivered in ready-to-install condition
_x000D_ - TÜV-certified quality
_x000D_ - Made from specially produced Prepreg material for Ilmberger
_x000D_ - Manufactured in our own production according to ISO 9001
_x000D_ - Installation using the original mounting points
_x000D_
_x000D_
_x000D_ - No additional registration required
_x000D_ - Sealing of all surfaces (inside and outside) with a unique plastic coating to protect against environmental influences of all kinds and provide an optimal base for the additional clear coat
_x000D_ - Additional clear coating on all visible surfaces for a uniquely smooth surface
_x000D_ - Multilayer UV protection layer to prevent aging processes in the material
_x000D_ - Delivered in ready-to-install condition
_x000D_ - TÜV-certified quality
_x000D_ - Made from specially produced Prepreg material for Ilmberger
_x000D_ - Manufactured in our own production according to ISO 9001
_x000D_ - Installation using the original mounting points
SSO.100.PP22M.K
Teil on võimalik MRT TECH OÜ e-poest toodete tellimisel valida erinevate kohaletoimetamise viisi vahel. Hinnad sisaldavad käibemaksu.
• SmartPOST pakiautomaadi teenus Eesti piires- hind vastavalt SmartPosti hinnakirjadele.
SmartPost-ga peab Teie tellimus üldjuhul jõudma kohale 1 - 3 tööpäeva jooksul alates ostusumma tasumisest. Juhul, kui mõnel põhjusel tekib tellimuse täitmisel viivitus, võtame teiega koheselt ühendust.
Tellimuse jõudmisel valitud pakiautomaati saadetakse Teile paki saabumise kohta SMS sõnum. Sõnum sisaldab pakiautomaadi asukohta ja personaalset uksekoodi, mille alusel Te oma paki kätte saate. Saadetisi hoiustatakse tasuta SmartPOSTi pakiautomaadis 7 kalendripäeva alates sõnumi saabumisest Teie mobiiltelefoni. Väljastamata pakkide kohta saadetakse teile täiendavalt 2 meeldetuletussõnumit.
• Tulen ise järele - 0 €
Oma tellimusele on võimalik ka ise järele tulla aadressil Tondi 92, Tallinn. Soovitav enne tulekut ette helistada ning kokku leppida
• DPD kullerteenus - Eesti, Baltikum, Euroopa