Denali SoundBomb™ Split Dual-Tone Air Horn

Description

The DENALI SoundBomb split dual-tone air horn produces an earsplitting 120 decibels of sound (four times louder than your typical motorcycle horn!) in a compact two-piece design for motorcycles with limited space. Ear-splitting performance demands attention to make your presence known and keep you safe from traffic that might not have noticed you. A 3-foot length of air line is included, allowing the powerful horn to be mounted separately from the compressor for the most efficient use of space. The lightweight components can be securely mounted with cable ties. For maximum safety, the compact compressor instantly supplies air to the trumpet when you press the factory horn button. An upgraded Plug-N-Play Wiring Kit is highly recommended and simple to connect. Significantly improve your safety and visibility with the SoundBomb split dual-tone air horn from DENALI!

Features

• - Sleek all-black construction
• - Demands attention, significantly increasing awareness
• - Tank-less design means no compressed air storage tank to run dry
• - Instant performance with no delay in sound output
• - Compressor & trumpet are separate units for installation where space is limited
• - 3 feet of air line included for versatile installation
• - Ear-splitting performance equal to the DENALI Compact Air Horn
• - Intended for motorcycles with limited space
• - Great mounting solution for motorcycles with or without fairings
• - Can be mounted behind bodywork without inhibiting performance
• - Easily mountable with included cable ties
• - Designed for use with the recommended optional wiring harness
• - Utilizes the factory horn button

Specs

• - 120 Decibels at 3 feet
• - Operating Voltage: 12V
• - Power Draw: 20 amps
• - Size (Compressor): 4.5″ x 2.9″ x 3.0″
• - Size (Acoustic Unit): 4.1″ x 3.7″ x 3.4″
• - Housing: Two-Part Design

What’s in the box?

• - Two-Piece Electro-Pneumatic Horn
• - 12-volt 30-amp relay
• - Heat-resistant air hose
• - Compressor mounting hardware
• - Acoustic unit mounting hardware
• - Additional zip tie mounting option

Mounting Notes

All necessary mounting hardware is included with the split horn to mount the compressor to an existing M8 thru hole and the acoustic unit to an existing M6 thru hole. For some motorcycle models, bike-specific mounting brackets are available. The compressor should be mounted so that the cylinder is vertical with no more than a 25-degree variance from the vertical position.

Fitment Notes

• - KTM Motorcycles: The CAN bus system on most KTM motorcycles is extremely sensitive. It is recommended to leave the OEM horn connected for proper operation and to prevent failure lights from appearing on the dash.
• - BMW Motorcycles: All modern BMW motorcycles use a specialty connector at the OEM horn connection. A DENALI Horn Wiring Adapter (P/N: DNL.WHS.10100) is necessary for plug-n-play connection and is available for purchase. Alternatively, you can use Posi-Tap connectors to make the connection.