Denali CANsmart™ Controller GEN II - Harley-Davidson Pan America 1250 & Pan America 1250 Special

Description

The ground-breaking Harley-Davidson CANbus controller provides plug & play connection and intelligent control of aftermarket and genuine Harley-Davidson accessories right from your bike's original switches or DENALI Accessory Manager Software. Simply connect the CANsmart™ Controller to your Harley-Davidson diagnostic port to access over 35 programmable accessory settings that provide intelligent control of auxiliary lights, horns, brake lights, or any other accessory you can imagine. The four accessory circuits are electronically fused and can provide up to 25 peak amps (10 amps continuous).

Features

• - High/Low Sync: Set passing lamps and auxiliary lights to switch between a programmable high/low setting with the factory high beam switch.
• - ON/OFF and Dim: Independently control two sets of lights ON/OFF and change intensity level (for both day and night) right from your bike's factory trip switch. Click three times to turn lights on/off, or hold for 3 seconds to enter dimming mode where you can cycle between 10% – 100% intensity.
• - Modulate Lights: Set passing lamps or auxiliary lights to modulate to increase your visibility to other motorists.
• - Flash to Pass: Pulse your high beam switch three times and your auxiliary lights will strobe three times fast.
• - Cancel With Turn Signal: Cancels the corresponding auxiliary light when you turn your turn signal on, preventing powerful auxiliary lights from overpowering your signal.
• - Flash With Turn Signal: Flashes the corresponding auxiliary light when you turn your turn signal on, enabling auxiliary lights to function as turn signals.
• - Plug & Play Horn Installation: Quickly and easily connect high-power aftermarket horns like the SoundBomb™ without additional harness or relay.
• - Strobe with Horn: Automatically strobes your passing lamps or auxiliary lights when you sound your horn, whether you have the factory horn or SoundBomb™ horn installed.
• - Deceleration Activated “Smart Brake” Technology: Reads vehicle speed in real-time to activate your auxiliary brake light during deceleration before you touch the brake. Sensitivity and minimum speed are adjustable.
• - Flash Pattern Braking: Provides four different flash patterns to make auxiliary brake lights more noticeable. Set them to flash under hard braking, flash continuously, or flash rapidly before holding steady (California legal flash rate).
• - Switched Power Source: Provides clean switched 12V power, perfect for GPS, phone, heated gear, or other devices.
• - Delay Time Out: Keeps accessories powered for up to 30 seconds after turning off the bike.
• - On Board Power: Ideal for powering your GPS, phone, heated gear, or any other electronic device.

What’s In The Box?

• - CANsmart™ Controller
• - (2) 5.5ft Light Extension Cables
• - 5ft SoundBomb Horn Extension Cable
• - B6 Brake Light Wiring Adapter
• - Zip-ties
• - Adhesive Hook-and-Loop Fastener
• - Micro USB Programming Cable

Software

Click HERE to download Windows or Mac CANsmart Accessory Manager Software.

Vehicle Fitment

• - Pan America 1250 (2021-2022)
• - Pan America 1250 Special (2021-2022)